Thursday, May 13, 2010

Hi Everyone!  So excited to be visiting you all again!  I would love for you to come visit me at my site The Frugal Designer to see what I have been working on.  I post several new furniture plans each week along with budget friendly and easy DIY Design and Landscape Plans that anyone on any budget can do!  You will get a glimpse of the happenings on my site, by the project below, but that is definitely not all that we are have in the works...come on over, have a peak around!


Build it plans


This collection is one in a series of pieces all inspired by the 2x2 and Parsons collections at a certain unnamed Specialty Retailer.  This collection is modular in form and function, most of the pieces can serve more than purpose or suit multiple needs.  Perfect for both small and large spaces and amazing for outdoor use poolside.


Here are a few of the other pieces in the 2x2 Collection, click on the 2x2 tab below to visit the plans for each of the pieces seen in the image.  Stop by to check out the other collections and plans as well by clicking on the Build It! tab above!


2x2 Collection



2x2 coll


Here is what we shall be building today!  This project is really easy, and very budget friendly, anyone can do this!  Sometimes Simple is extremely Stylish!


Final Straight
** BEFORE BEGINNING TO BUILD, ALWAYS CHECK IN ON MY SITE TO MAKE SURE

YOU HAVE THE MOST UP TO DATE PLANS, I OCCASIONALLY UPDATE AND CHANGE THE
PLANS TO MAKE THE BUILDING PROCESS EASIER OR TO ALLOW FOR LESS
EXPENSIVE PURCHASING OF MATERIALS.


Materials


4" Screws


2" Screws




Wood Glue


Wood Filler


Sandpaper


Finishing Supplies


Wood:


2 - 2x2 @ 6'


2 - 2x2 @ 8'


1 - 3/4x3/4 Trim @ 8'


1 - 3/4x3/4 Trim @ 10'


1 sheet of 3/4" Plywood in a matching specie of wood (if possible) @ 4'x8' (or smaller if you can find a remnant)


Tools


Tape
Measure


Square


Sander


Drill


Saw


Cut list


4 - 2x2 @ 16" (Legs)


4 - 2x2 @ 43" (Front Back Rails)


4 - 2x2 @ 17" (Side Rails)


2 - 3/4x3/4" Trim @ 43" (Supports)


2 - 3/4x3/4" Trim @ 15 1/2" (Supports)


1 - 3/4" Plywood @ 43x17" (Table Top)



Instructions


**Always Pre-Drill and Counter Sink for the most
professional appearance. Check for Square after EACH step.  It will
really matter in this project.  Always fasten from the inside out whenever possible to avoid filling Screw Holes.  Adhere to all safety standards and
guidelines.  


For outdoor use, purchase wood that will hold up to the elements such as Cedar, Redwood, and Teak, and sand and finish each piece before you assemble.  Use an outdoor water seal product to ensure a lasting finish.


1  Attach the Lower Rails to the Legs:  Use 4" Screws and Wood Glue.


Step 1


2  Attach the Upper Rails to the Legs: Use 4" Screws and Wood Glue


Step 2


3  Attach the Table Supports to the Rails:  Use 2" Screws and Wood Glue, fasten from the inside to prevent visible Screw Holes.


Step 3


4  Insert Plywood that is Cut to Size: Use 3/4" Plywood and attach if you desire to, using 1 1/4" Screws from underneath, up through the supports.


Step 4
5  Fill any screw holes with Wood Filler, and finish as desired.  For a glossy painted look, run wood filler along the edge where the plywood and the rails meet, then sand and finish as desired.






Final angle





For finishing tips and tutorials see my

Finishing school


Finishing school




In return for providing this plan for you, I would greatly
appreciate
you sharing your experiences with everyone as well as sending in
pictures of what you build so that I can show it off!


Join my Flikr Group: 
http://www.flikr.com/groups/FrugalDesignerSS




**Disclaimer: Some rights reserved. Private use only. Plans from this
page are not to be used for commercial purposes or republished without
the express written consent of Rayan Turner, The Frugal Designer.

I hope to provide accurate plans, however, I cannot guarantee each plan
for accuracy. Not every plan that I post has been built and tested, so
you are building at your own risk. It
is recommended that you have a clear understanding of how the project
will fit together and how it works before beginning any project. Please
contact me if you find an error or inaccuracy so that I might fix it.
______________________________________________________________________________


I hope you enjoyed this post, please click on the image below to visit my site and follow along.  I post several new furniture plans each week along with easy and budget friendly Design and Landscape Plans!  Hope to see you all soon, Xx Rayan The Frugal Designer


Header2-n-4

  

0 comments:

Post a Comment

  © Blogger template On The Road by Ourblogtemplates.com 2009

Back to TOP